Aqua Gloss Water-Based Spray Varnish 150ml PINTYPLUS

Water-based acrylic varnish for finishing surfaces previously painted with Aqua Pintyplus series paints.

Suitable for both indoor and outdoor use.

Suitable for all surfaces, including polystyrene foam. Recommended for protecting all types of wood, metal, cardboard, stone, and many types of plastic.

Main characteristics:

water based;

Matte/Glossy Effect:

Low spray pressure;

No smell;

Excellent adhesion and coverage ;

Technical specifications:

·    Varnish Covers area: 210/150 ml=1 m2

·          Drying time: 1 hour (15 minutes on cellular surfaces).

·          Re-apply: 30 minutes later.

·          Excellent adhesion to wood, rope, cork, polystyrene, carbon steel and stainless steel.

Recommendations for use: Before using the spray, make sure the work surface is dry and free of any contaminants (dirt, grease, rust, or old paint). Shake the can for 1 minute (the ball inside should rattle) to ensure a uniform coating. Depending on the technique you choose, the distance from the work surface can vary from 5 cm to 20 cm.

After finishing work, blow out the spray gun, holding the can upside down, until the paint flow stops.

Do not use on live equipment and apply paint only outdoors or in well-ventilated areas.

Warning!

Keep out of reach of children. Avoid inhalation. Wear protective gloves, a respirator mask, and goggles when handling.

Capacity: 150 ml