Mirror Effect Spray Paint ART & CRAFT 400ml PINTYPLUS

Spray paint Art MIRROR EFFECT by PINTYPLUS Used to create a mirror effect on glass surfaces. Suitable for glass, acrylic, and similar materials. The best glossy silver effect is achieved on opaque surfaces.

The mirror effect is created by spraying paint onto the back of a surface to create a reflective, mirror-like finish. It is recommended for use on very smooth surfaces.

Technical specifications:

Aerosol covers an area of: 400 ml = 2 m2

Complete drying – 5 min.

Re-apply paint after 2 minutes (each layer).

Directions for use: Before applying paint, ensure the work surface is dry and free of any contaminants (dirt, grease, rust, or traces of old paint). Shake the can for 1 minute (the ball inside should shake) to distribute the paint evenly. To ensure thin, even coats of paint are applied, hold the can 20 cm from the work surface, first horizontally, then vertically. Apply several thin coats, waiting a few seconds between each coat. For best results and to avoid drips, it is recommended to paint slowly.

After finishing work, blow out the spray gun, holding the can upside down, until the paint flow stops.

Do not use on live equipment and apply paint in well-ventilated areas.

Tip: To achieve the desired mirror effect, apply only the paint without priming the surface first.

Capacity: 400 ml